@article{oai:nifs-repository.repo.nii.ac.jp:00010952,
 author = {HAMAJI, Yukinori and TOKITANI,  Masayuki and MASUZAKI,  Suguru and SAKAMOTO,  Ryuichi and TAMURA,  Hitoshi and SAGARA,  Akio},
 issue = {Special Issue 1},
 journal = {Plasma and Fusion Research},
 month = {Jun},
 note = {0000-0002-9230-2334, ACT2 (Active Cooling Teststand 2), a high heat flux test facility using electron beam has been upgraded from ACT facility and started the operation. A new electron gun enables the steady state and transient heat load on actively cooled samples. ACT2 can achieve large loaded area with steady state reactor relevant heat flux (∼ 20 MW/m2) up to 200 × 200 mm2 and simulation of edge localized modes with short pulse length (∼ 100 μs). Beam profile was obtained about 9 mm with graphite probes. The heat flux is obtained by water calorimetry and measurement of the current through the samples.},
 title = {ACT2: a High Heat Flux Test Facility Using Electron Beam for Fusion Application},
 volume = {11},
 year = {2016}
}